BMW Assembly Front - Used
not available

BMW Assembly Rear - Used
not available

BMW Auto Level Accummultor - Used
Located near each rear shock, under neath the car, the accumulator store hydraulic pressure for the auto level system.

BMW Auto Level Lines - Used
These are the hydraulic lines used in the load level system.

BMW Auto Level Pump - Used
This part is located in the trunk, under the spare tire of an E28 or E24. The auto level pump supplies hydraulic pressure to the auto level shocks, thereby controling the rear height of the car. E32 and E34 and later cars use the power steering pump to supply hydraulic pressure. SEE STEERING - Power Steering Pump

BMW Auto Level Shock - Used
This applies to rear shocks only. Auto level or Load level shocks have a hydraulically controlled height adjustment. Utilizing the rear sway bar as a point of reference, any additional weight added to the car results in activation of the system to maintain a constant ride height. Depending on the year and model, either the power steering pump or a seperate pump located in the truck is used to supply hydraulic pressure to the load level system. This system is automatic, there is no on/off switchto activate it.

BMW Control Arm / Trailing arm / Wishbone L/R - Used
Rear control arms do not include brake parts, bearings or hubs. We usually leave the hub on the control arm, but we do not guarantee the bearings to be good. Brake dust shields are also left on the control arm but we normally do not guarantee them to be in perfect shape.

BMW Control Arm / Trailing arm / Wishbone R/R - Used
Rear control arms do not include brake parts, bearings or hubs. We usually leave the hub on the control arm, but we do not guarantee the bearings to be good. Brake dust shields are also left on the control arm but we normally do not guarantee them to be in perfect shape.

BMW Control Arm L/F - Used
Arms on front suspension that hold the front strut in place. Control arms will have good ball joints but we do not warranty the bushings to be good. It is ecommended to buy new control arm bushing when replacing the control arm.

BMW Control Arm R/F - Used
Arms on front suspension that hold the front strut in place. Control arms will have good ball joints but we do not warranty the bushings to be good. It is ecommended to buy new control arm bushing when replacing the control arm.

BMW Crossmember Front - Used
Located in the front of the car, also called the subframe, this is what the engine sits on. The control arms and steering linkage also connect to this part.

BMW Crossmember Rear - Used
The rear crossmember is the part of the rear suspension that the differential bolts to. The control arms will bolt to the rear crossmember. The control arms are not included with the crossmember.

BMW Crossmember Rear Mount - Used
The crosmember mount is the rubber bushing that connects the rear crossmember to the body of the car.

BMW Cruise Control - Used
not available

BMW Differential Bracket Rear - Used
This is the bracket that holds the reard differential in place. This is not the differential cover or the rear crossmember.

BMW Pitman Arm Rear - Used
This is the small dogbone on the rear control arm. It controls movement of the rear crossmember.

BMW Reinforcement Plate - Used
This is the piece of metal bolted to the front crossmember to help reienforce it. Found on All Wheel Drive vehicles.

BMW Shock Mount Rear - Used
This is the rubber mount at the top of the rear shock absorber.

BMW Shocks / Strut Inserts - Used
Used shocks and strut cartridges do not have a warrenty.

BMW Spring Front - Used
Located on the front strut assembly.

BMW Spring Perch / Plate - Used
This is the metal plate on top of the strut below the bearing. The spring is held in place by the perch.

BMW Spring Rear Pairs / Air Bags - Used
Located in the rear of the car. Some cars, such as 5,6 and 7 series models, will have coil over shocks with the spring located on the shock. Other cars, like the 3 series models, will have the spring between the car body and the rear control arm. To figure out BMW part number - springs with red stripe and one to number on spring. Springs without red stripe add 2 to the number on the spring.

BMW Strut Bearing Caps Front - Used
The strut cap is the bearing at the top of the strut assembly. The bearing swivels as the spring compresses and uncompresses.

BMW Strut L/F Assembly - Used
Strut assmeblies include Strut housing, spring, perches and pads, strut bearing cap, king pin and hub. Used strut assemblies include wheel bearings and strut cartridges but we do not guarantee them to be good. Does not include brake rotor, brake caliper or ABS sensor. EDC = Electronic Damping Control Identified by wires coming out the top of the strut housing.

BMW Strut L/F Housing - Used
The strut housing does not include the spring, the hub or the strut cap. Most strut housings will have the brake dust shield still attached. EDC = Electronic Damping Control Identified by wires coming out the top of the strut housing.

BMW Strut R/F Assembly - Used
Strut assmeblies include Strut housing, spring, perches and pads, strut bearing cap, king pin and hub. Used strut assemblies include wheel bearings and strut cartridges but we do not guarantee them to be good. Does not include brake rotor, brake caliper or ABS sensor. EDC = Electronic Damping Control Identified by wires coming out the top of the strut housing.

BMW Strut R/F Housing - Used
The strut housing does not include the spring, the hub or the strut cap. Most strut housings will have the brake dust shield still attached. EDC = Electronic Damping Control Identified by wires coming out the top of the strut housing.

BMW Sway Bar - Used
Steel bar at front or rear of car, works to keep the tires in contact with the pavement.

BMW Sway Bar Bracket - Used
Sway bar brackets are located near the middle of the sway bar and usually bolt to the car body. The brackets work inconjuction with the sway bar bushings to hold the sway bar in place.

BMW Sway Bar Bushing - Used
These are the rubber bushings that mount the sway bar to the subframe or car body. The bushing goes around the sway bar and is held in place by a bracket. The bushing inside diameter matches the outside diameter of the sway bar it is being used for.

BMW Sway Bar Link - Used
The sway bar link is located at each end of the front or rear sway bar. It is what connects the sway bar to the control arms.