BMW Assembly - Used
The bumper assembly includes any parts that are fastened to the cover or face bar, including marker lights and mounting parts.
Fog lights are not included with front bumper assemblies.
|
| |
BMW Chrome Trim - Used
Trim along the top of the bumper. |
| |
BMW Chrome Trim Aftermarket - New
Trim along the top of the bumper. |
| |
BMW Cover - Used
The front bumper cover is the large plastic piece that mounts to the reinforcement and the impacts mount on it. |
| |
BMW Cover Aftermarket - New
The front bumper cover is the large plastic piece that mounts to the reinforcement and the impacts mount on it. |
| |
BMW Cover Gasket - Used
This is the gasket material that slides over the bumper covers edges where the cover meets the body, |
| |
BMW Cover Mounting Bracket - Used
This bracket holds the bumper cover to the body on each side. |
| |
BMW End Left - Used
This is the plastic or rubber trim piece that fits between each end of the bumper and the body of the car. |
| |
BMW End Right - Used
This is the plastic or rubber trim piece that fits between each end of the bumper and the body of the car. |
| |
BMW Face Bar - Used
This is the anodized aluminum bar that most of the bumper parts connect to on early model cars. This is not the reinforcement bar on late cars with plastic bumpers. |
| |
BMW Face Bar Aftermarket - New
This is the anodized aluminum bar that most of the bumper parts connect to on early model cars. This is not the reinforcement bar on late cars with plastic bumpers. |
| |
BMW Face Bar Mounting Bracket - Used
This is what is used in place of a bumper shock on those cars that have steel bumpers. |
| |
BMW Face Bar Spacer - Used
This is the cone shaped filler that is between a steel bumper and the face bar mounting bracket. |
| |
BMW Filler Center - Used
The center filler fills the gap between the bumper face bar and the valance/body on most early cars. |
| |
BMW Filler Left - Used
The left filler fills the gap between the bumper face bar and the valance/body. The front bumper end is intergrated into the front fillers on early E30's and E28's. |
| |
BMW Filler Right - Used
The left filler fills the gap between the bumper face bar and the valance/body. The front bumper end is intergrated into the front fillers on early E30's and E28's. |
| |
BMW Foglight Cover - Used
The fog light cover is used in place of a fog light to fill the hole in those cars that have fog lights mounted in the bumper cover. |
| |
BMW Grill - Used
This can be any grill that is located in the bumper cover. |
| |
BMW Grill Aftermarket - New
This can be any grill that is located in the bumper cover. |
| |
BMW Impact Strip - Used
The impact strip(s) are usually black plastic or rubber, and mount on the front of the face bar or the cover for protection. |
| |
BMW Impact Strip Aftermarket - New
The impact strip(s) are usually black plastic or rubber, and mount on the front of the face bar or the cover for protection. |
| |
BMW License Plate Bracket - Used
Bracket that holds license plate |
| |
BMW License Plate Bracket Aftermarket - New
Bracket / Impact that holds license plate. |
| |
BMW Lower Cover - Used
This part goes between the brake air ducts on the bottom behind the bumper cover. |
| |
BMW Reinforcement - Used
The reinforcement bar is usually made from aluminum or fiberglass and this is what the bumper cover mounts to. The reinforcement mounts to the bumber shocks. |
| |
BMW Reinforcement Aftermarket - New
The reinforcement bar is usually made from aluminum or fiberglass and this is what the bumper cover mounts to. The reinforcement mounts to the bumber shocks. |
| |
BMW Reinforcement Bracket - Used
This bracket supports the side pieces of the front bumper reinforcement. |
| |
BMW Reinforcement Filler - Used
This is the foam rubber insert that goes in front of the reinforcement bar and behind the front cover. |
| |
BMW Reinforcement Stopper - Used
Fits between bumper shocks and bumper reinforcement. |
| |
BMW Shock Assembly - Used
This is the impact absorber that the bumper face bar or reinforcement bolts to. It is gas filled and is not re-usable once compressed. |
| |
BMW Shock Cartridge - Used
This is the gas filled cartridge only. |
| |
BMW Shock Cover - Used
This is the black rubber piece that covers the top of the front bumper shock. This would also include the black rubber accordian sleeve that some early cars have. |
| |
BMW Shock Guide - Used
This is the rectangular rubber piece that surrounds the outside of the bumper shock. |
| |
BMW Shock Support Bracket - Used
The part between the cartridge and the face bar/reinforcement.
This is what actually bolts to the back of the face bar/reinforcement. |
| |
BMW Spoiler / Splitter - Used
This is the piece of rubber below, but attached to, the bumper cover. |
| |
BMW Spoiler Front Aftermarket - New
This is the piece of rubber below, but attached to, the bumper cover. |
| |
BMW Surround - Used
The bumper surround is only found on '78-'87 E23 model cars. It is the black plastic that encompasses the front face bar. It takes the place of the bumper fillers, the bumper ends, and the front valance. |
| |
BMW Surround Bracket - Used
This is the bracket that mounts in the center of the bumper surround. |
| |
BMW Tow Hook Cover - Used
This is the plastic cover that snaps into the bumper cover just in front of the tow hook on most models with plastic bumpers. On E30's and E36's it is the little piece that completes the impact strip. |
| |
BMW Tow Hook Cover Aftermarket - New
This is the plastic cover that snaps into the bumper cover just in front of the tow hook on most models with plastic bumpers. On E30's and E36's it is the little piece that completes the impact strip. |
| |
