BMW Alternator Air Duct - Used
This is the air tube that draws air in and directs it to the alternator. |
| |
BMW Brake Duct - Used
The brake duct is the channel that directs air flow from the front of the car to the front brakes. |
| |
BMW Brake Duct Bracket - Used
This is the bracket(s) that support(s) the brake ducts. |
| |
BMW Engine Splash Shield - Used
This is the plastic or fiberglass cover(s) that are underneath the engine. On most models the engine splash shield will connect to the front spoiler in some fashion. |
| |
BMW Fender Flare Front - Used
This is the plastic trim that goes around the outside of the front wheel well. |
| |
BMW Fender Flare Rear - Used
This is the plastic trim that goes around the outside of the rear wheel well. |
| |
BMW Header Panel - Used
The header panel is found on E23 and E24 cars. It is located in front of the hood above the grills where the Roundell mounts. The E23 panel unbolts from the car. The E24 is welded in and is a part of the radiator support. |
| |
BMW Radiator Air Duct - Used
This is the plastic located behind the front bumper that directs the air flow to the radiator. |
| |
BMW Roll Bar - Used
Found on the convertables, these are the head protection supports that either pop up in event of the wheels leaving the ground or permenately stick up behind the seats. |
| |
BMW Roof Rack - Used
Located on the roof, this is the factory racks for luggage. |
| |
BMW Skirt Rear - Used
Located under the rear bumper, this is a plastic or fiberglass panel that increases the length of the rear bumper. |
| |
BMW Skirt Side Left - Used
This is the plastic piece that covers the rocker panel from wheel well to wheel well. |
| |
BMW Skirt Side Right - Used
This is the plastic piece that covers the rocker panel from wheel well to wheel well. |
| |
BMW Spoiler Bracket - Used
This is the all the mounting hardware for any "IS" spoiler. |
| |
BMW Spoiler Front - Used
Located below the front bumper, this is a plastic or fiberglass panel that increases the length of the front bumper. |
| |
BMW Spoiler Front Aftermarket - New
Located below the front bumper, this is a plastic or fiberglass panel that increases the length of the front bumper. |
| |
BMW Spoiler Rear - Used
The rear spoiler generally mounts on the top rear edge of the decklid. |
| |
BMW Spoiler Rear Aftermarket - New
The rear spoiler generally mounts on the top rear edge of the decklid. |
| |
BMW Valance Brackets - Used
Metal brackets that support the valance. |
| |
BMW Valance Front - Used
The front valance is the sheet metal that is located behind the front bumper assembly. This is what the front spoiler usually attaches to. Some models may have fog lights in the valance. |
| |
BMW Valance Front Aftermarket - New
The front valance is the sheet metal that is located behind the front bumper assembly. This is what the front spoiler usually attaches to. Some models may have fog lights in the valance. |
| |
BMW Valance Rear - Used
The rear valance is usally metal or plastic and makes up the lower part of the rear bumper assembly. |
| |
BMW Valance Rear Aftermarket - New
This part is located on the bottom of the Rear Bumper Cover. Has recess for muffler cut into it. |
| |
